Accessories
Tool and Beverage Holders
*Holes for hanging baits
*Screw driver hole
*Slot for holding long needle nose pliers
*Hang planer board releases or our fish towel
*Beverage Holder
#TH-100 Combo
Tool/Beverage holder
$69.99
#BH-100 #TH-100
Beverage holder Tool Holder
for track
$24.99 $49.99
No picture yet
BH-100V
Beverage holder for
Tool holder/Vertical Bird Tree
$29.99
Bimini Top Brackets
This compact mounting plate has two hole patterns drilled & tapped to allow your Bimini top bracket to be removed from your boat.
This allows you to mount a longer piece of track and still use
your bimini top, but now the bracket can slide into our track.
*Currently drilled for two of the most popular Bracket Styles
*Luhr Jensen speed adapter also mounts on this plate
*Plates only brackets not included
#LSA-100
$14.99 Each
This compact mounting plate has two hole patterns drilled & tapped to allow your Bimini top bracket to be removed from your boat.
This allows you to mount a longer piece of track and still use
your bimini top, but now the bracket can slide into our track.
*Currently drilled for two of the most popular Bracket Styles
*Luhr Jensen speed adapter also mounts on this plate
*Plates only brackets not included
#LSA-100
$14.99 Each
Ball Mount Adapter Plate
This adapter plate features a 1/2" thick x 4-1/2" long aluminum
base with three mounting patterns drilled & tapped.
*Ram® electronics ball mount
*Adjustable antenna bracket so you can slide your antenna
assembly right into the track.
*Anglers Pal brand ball mount rod holder
*Plate only ball mount not included
#A-450
$19.99
This adapter plate features a 1/2" thick x 4-1/2" long aluminum
base with three mounting patterns drilled & tapped.
*Ram® electronics ball mount
*Adjustable antenna bracket so you can slide your antenna
assembly right into the track.
*Anglers Pal brand ball mount rod holder
*Plate only ball mount not included
#A-450
$19.99
Thumb Screws
New star design allows better finger grip for tightening or loosening, this design
also has an opening in the top of the Star for dropping a wrench into
and tightening directly on the stainless steel screw.
Made from super tough nylon with 1/4 - 20 x 3/4" long stainless steel screw.
#T-520-4 7/8" long
$7.99 4/pack
#T-520-4L 1-1/8" long
$8.99 4/pack
New star design allows better finger grip for tightening or loosening, this design
also has an opening in the top of the Star for dropping a wrench into
and tightening directly on the stainless steel screw.
Made from super tough nylon with 1/4 - 20 x 3/4" long stainless steel screw.
#T-520-4 7/8" long
$7.99 4/pack
#T-520-4L 1-1/8" long
$8.99 4/pack
Replacement Caps
Keep Cap with Strap
Our own design! Made from the most durable material
to withstand the elements. These caps fit rod holders
using a 2” dia. tube x 1/8” wall.
#K-500-2
$17.99/pair
Rod Tube Replacement Cap
An economy replacement cap to be used on
all tube type rod holders that have
a 2” dia. tube x 1/8” wall
#C-500-2
$7.49/pair
Keep Cap with Strap
Our own design! Made from the most durable material
to withstand the elements. These caps fit rod holders
using a 2” dia. tube x 1/8” wall.
- They do not come off tube
- Rod butts don’t wear through
- Keeper strap holds rod securely in holder
- Sold in pairs
#K-500-2
$17.99/pair
Rod Tube Replacement Cap
An economy replacement cap to be used on
all tube type rod holders that have
a 2” dia. tube x 1/8” wall
#C-500-2
$7.49/pair
Adjustable Position Cleat
Great for attaching extra boat fenders, dock lines or to help position drift bags.
*4" or 6" chrome plated zinc cleat
*6" long aluminum plate
*Slides into any of our track
4" Cleat #CP-04 $25.99
6" Cleat #CP-06 $29.99
Great for attaching extra boat fenders, dock lines or to help position drift bags.
*4" or 6" chrome plated zinc cleat
*6" long aluminum plate
*Slides into any of our track
4" Cleat #CP-04 $25.99
6" Cleat #CP-06 $29.99
Universal Bracket
This bracket was designed to clamp or bolt hand liner reels to, helping protect the boats exterior. River trollers find it easier to fish with the reel hanging securely over the side of the boat,when not using the bracket simply slides out of the track. The bracket has since been used for many other mounting options including downrigger's on small boats, barbecue grills, lanterns, fish finders and aqua views just to name a few.
*bracket measures 3" tall and 12" arm.
#RWL-100
Universal Bracket
$59.99
This bracket was designed to clamp or bolt hand liner reels to, helping protect the boats exterior. River trollers find it easier to fish with the reel hanging securely over the side of the boat,when not using the bracket simply slides out of the track. The bracket has since been used for many other mounting options including downrigger's on small boats, barbecue grills, lanterns, fish finders and aqua views just to name a few.
*bracket measures 3" tall and 12" arm.
#RWL-100
Universal Bracket
$59.99
Multiple Rod Holder Adapter Base
Traxstech wants to grow with you so if you have rod holders already we can adapt.
#BJBA-3
Multiple Rod Holder Adapter Base
$44.99
Traxstech wants to grow with you so if you have rod holders already we can adapt.
If you own Big Jon pedestal mount holders they can now be fastened to our new 3” tall adaptor base that gives you the flexibility to slide them into our tracks for greater positioning, as always our base provides you the 45 degrees of side to side rotation so you can turn the entire set-up and point the rods out and back for better use when running planer boards.
*Fits all brand multiple rod holders with a 4” x 4” base and a mounting hole pattern of 3-1/4” square.
#BJBA-3
Multiple Rod Holder Adapter Base
$44.99
Mounting Track End Caps
Aluminum mounting tracks come with a pre-drilled and tapped hole at each end for use with the Traxstech aluminum end caps. For locking your equipment into any of our mounting tracks and keeping your equipment secure from sliding out.
Made from solid aluminum!
* Includes stainless screw and wrench
* 2 pieces per package
#MTEC-2
Mounting Track Endcaps
$13.99/Pair
Aluminum mounting tracks come with a pre-drilled and tapped hole at each end for use with the Traxstech aluminum end caps. For locking your equipment into any of our mounting tracks and keeping your equipment secure from sliding out.
Made from solid aluminum!
* Includes stainless screw and wrench
* 2 pieces per package
#MTEC-2
Mounting Track Endcaps
$13.99/Pair
Live Bait Fishing
Using driftmaster type rod holders. This plate will allow you to
mount a threaded 3/8" dia rod or 1/2" dia rod to it and slide
into the track to position these rod holders in any location
you would like, without drilling each one in a specific location.
They can be removed or relocated by tightening the thumb screw.
*plate only
#DM-375 Base Plate with 3/8" dia hole
$9.99
#DM-500 Base Plate with 1/2" dia hole
$9.99
Using driftmaster type rod holders. This plate will allow you to
mount a threaded 3/8" dia rod or 1/2" dia rod to it and slide
into the track to position these rod holders in any location
you would like, without drilling each one in a specific location.
They can be removed or relocated by tightening the thumb screw.
*plate only
#DM-375 Base Plate with 3/8" dia hole
$9.99
#DM-500 Base Plate with 1/2" dia hole
$9.99
Adapter Plate
This plate allows other brand rod holders, such as; Cabela's, Folbe and Scotty deck mounts, Down-East S-17 Salty, Tite-Loc 2" x 2" Mounting Base, Luhr-Jensen Speed Indicator mounting base, Vectors single, double and triple rod holder trees to be mounted and used in our track system. Adapter plate comes with stainless steel hardware and thumbscrews
Adapter plate only
$24.99
Adapter plate w/S-17 Salty
$79.99
This plate allows other brand rod holders, such as; Cabela's, Folbe and Scotty deck mounts, Down-East S-17 Salty, Tite-Loc 2" x 2" Mounting Base, Luhr-Jensen Speed Indicator mounting base, Vectors single, double and triple rod holder trees to be mounted and used in our track system. Adapter plate comes with stainless steel hardware and thumbscrews
Adapter plate only
$24.99
Adapter plate w/S-17 Salty
$79.99
Weight Caddy
Weight caddy's are designed to assist in keeping weight secure while etting-up or re-setting baits.
It is not safe to run or travel with weight in caddy.
CB-140 is molded weight on aluminum plate
CB-160 is all aluminum
CB-140 CB-160
Weight caddy Tall Weight Caddy
$20.99 $29.99
Weight caddy's are designed to assist in keeping weight secure while etting-up or re-setting baits.
It is not safe to run or travel with weight in caddy.
CB-140 is molded weight on aluminum plate
CB-160 is all aluminum
CB-140 CB-160
Weight caddy Tall Weight Caddy
$20.99 $29.99
