Gimbal Mounts

No reviews yet Write a Review
SKU:
GM, GM-100, GM-100-175, STGM-100, STGM-100-175, STGM-180, GM-180, GM-180-175, GM-180-15
$89.99 - $159.99

Description

Traxstech's gimbal mounts are designed to work in conjunction with flush-mounted rod holders and come in a wide variety of sizes. Our pre-drilled and tapped gimbal mounts allow for easy installation of Traxstech, Cannon, Big Jon, Scotty, Vector, Walker and Penn brand downriggers. Our Traxstech 6" track can also be mounted into different directions on the top plate of the gimbal to give a wider range of use.

Such as a single rod holder, two, three or four-rod holder trees in vertical or horizontal options, our downrigger swivel base or anything else we offer. The uniqueness of adapting fishing equipment to a gimbal Mount allows an easy installation. When not in use, the gimbal can be removed to return the boat to its original condition. We do strongly suggest to look under the gunwale and make sure the flush-mount you are using is securely bolted.

30 Degree Gimbal Mount

  • Part: #GM-100
  • Angle: 30-degree (drilled and tapped)
  • Tube diameter: 1-1/2"
  • Tube length: 10-1/2"
  • Hitch pin included

30 Degree Gimbal Mount with 1-3/4 Diameter Tube

  • Part: #GM-100-175
  • Angle: 30-degree (drilled and tapped)
  • Tube diameter: 1-3/4"
  • Tube length: 10-1/2"
  • Hitch pin included

90 Degree Straight Gimbal Mount with 1-1/2 Inch Diameter Tube

  • Part: #STGM-100
  • Angle: 90-degree straight gimbal mount (drilled and tapped)
  • Tube diameter: 1-1/2"
  • Tube length: 10-1/2"
  • Hitch pin included

90 Degree Straight Gimbal Mount with 1-3/4 Inch Diameter Tube

  • Part: #STGM-100-175
  • Angle: 90-degree straight gimbal mount (drilled and tapped)
  • Tube diameter: 1/3/4"
  • Tube length: 13"
  • Hitch pin included

Angled Gimbal with Track

If the flush mount is pointed straight out the back parallel with the gunwale, then the fixed position gimbal will work for you. As always, everything we make will slide into and securely fasten in the track. Rod holders, grill, a cleat with bumper and tool/beverage holders are just a few of the great combinations for the following units.

30 Degree Gimbal Mount with 1-1/2 Diameter Tube and 18 Inch Track

  • Part: #GM-180
  • Angle: 30-degree angle gimbal mount (drilled and tapped)
  • Tube diameter: 1-1/2"
  • Tube length: 10-1/2"
  • Hitch pin included

30 Degree Gimbal Mount with 1-3/4 Inch Diameter Tube and 18 Inch Track

  • Part: #GM-180-175
  • Angle: 30 degree angled gimbal mount (drilled and tapped)
  • Tube diameter: 1-3/4"
  • Tube length: 10-1/2"
  • Hitch pin included

15 Degree Gimbal Mount with 1-1/2 Diameter Tube and 18 Inch Track

  • Part: #GM-180-15
  • Angle: 15 degree angled gimbal mount (drilled and tapped)
  • Tube diameter: 1-1/2"
  • Tube length: 10-1/2"
  • Hitch pin included

Traxstech offers a 30 Degree Adjustable Gimbal Mount with a variety of sizes and options that are designed to work in conjunction with flush-mounted rod holders. If your flush mounts are not parallel with the gunwale, you can use an adjustable gimbal to line up the track by moving the track in the direction you want. 

We strongly suggest that you to look under the gunwale to make sure the flush-mount you are using is securely bolted.

  • Adapting fishing equipment to a gimbal mount allows an easy installation.
  • When not in use, the gimbal can be removed to return the boat to its original condition.
  • Hitch pin included in all models.
  • If the flush mount is pointed straight out the back parallel with the gunwale, then the fixed position gimbal will work for you.
  • As always, everything we make will slide into and securely fasten in the track.
  • Rod holders, grill, a cleat with a bumper, and tool/beverage holders are just a few of the great combinations for this unit.

You can use the following Adjustable Gimbals Mounts to install our trolling/downrigger bars to your boat.

30 Degree Adjustable Gimbal Mount with 1-1/2 inch diameter tube with a plate for trolling bar

  • Part: #AGM-150-DB
  • Tube diameter: 1-1/2"
  • Tube length: 10"

30 Degree Adjustable Gimbal Mount with 1-3/4 inch diameter tube with a plate for trolling bar

  • Part: #AGM-175-DB
  • Tube diameter: 1-3/4"
  • Tube length: 10"

You can use the following Adjustable Gimbal Mounts with the tracks on them to install items such as a single rod holder, two, three, or four-rod holder trees in vertical or horizontal options, our downrigger swivel base, or anything else we offer.

30 Degree Adjustable Gimbal Mount with 1-1/2 inch diameter tube with a 12" mounting track (#MT-12) on top

  • Part: #AGM-150-12
  • Tube diameter: 1-1/2"
  • Tube length: 10"

30 Degree Adjustable Gimbal Mount with 1-3/4 inch diameter tube with a 12" mounting trarck (#MT-12) on top

  • Part: #AGM-175-12
  • Tube diameter: 1-3/4"
  • Tube length: 10"

30 Degree Adjustable Gimbal Mount with 1-1/2 inch diameter tube and an 18" mounting track (#MT-18) on top

  • Part: #AGM-150-18
  • Tube diameter: 1-1/2"
  • Tube length: 10"

30 Degree Adjustable Gimbal Mount with 1-3/4 inch diameter tube with an 18" mounting track (#MT-18) on top

  • Part: #AGM-175-18
  • Tube diameter: 1-3/4"
  • Tube length: 10"

30 Degree Adjustable Gimbal Mount with 1-1/2 inch diameter tube with a 24" mounting track (#MT-24) on top

  • Part: #AGM-150-24
  • Tube diameter: 1-1/2"
  • Tube length: 10"

30 Degree Adjustable Gimbal Mount with 1-3/4 inch diameter tube with an 24" mounting track (#MT-24) on top

  • Part: #AGM-175-24
  • Tube diameter: 1-3/4"
  • Tube length: 10"

Product Features:

  • Proudly made in the USA!
  • Has our signature textured finish:
    • Adds durability to the aluminum components, hardens your wear surface, no bright reflection, easy to clean.
    • Every aluminum part is anodized after our texturing process to provide the highest quality available.
    • Salt spray tested and proven.
  • Comes in 1 color options:
    • Clear / Silver

Videos