AGM / Adjustable Gimbal Mount

No reviews yet Write a Review
SKU:
AGM-150-12, AGM-150-18, AGM-150-24, AGM-175-12, AGM-175-18, AGM-175-24, AGM-175-DB, AGM-150-DB
$159.99 - $249.99

Description

Traxstech offers a wide variety of gimbal mounts. 

Designed to work in conjunction with flush-mounted rod holders.

Our pre-drilled and tapped gimbal Mount allow easy installation of Traxstech, Canon, Big John, Scotty, Vector, Walker and Penn brand downriggers.

Our Traxstech 6" track can also be mounted into different directions on the top plate of the gimbal to give a wider range of use.

Such as a single rod holder, two, three or four-rod holder trees in vertical or horizontal options, our downrigger swivel base or anything else we offer.

The uniqueness of adapting fishing equipment to a gimbal Mount allows an easy installation.

When not in use, the gimbal can be removed to return the boat to its original condition.

We do strongly suggest to look under the gunwale and make sure the flush-mount you are using is securely bolted.

 

Traxstech delivers a 30 Degree Adjustable Gimbal Mount with a variety of sizes and options.

Designed to work in conjunction with flush-mounted rod holders. If your flush mounts are not parallel with the gunwale, you can use an adjustable gimbal to line up the track to where you want by moving the track in the direction you want.

The uniqueness of adapting fishing equipment to a gimbal mount allows an easy installation.

When not in use, the gimbal can be removed to return the boat to its original condition.

We do strongly suggest for you to look under the gunwale, and make sure the flush-mount you are using is securely bolted.

Hitch pin included in all models.

If the flush mount is pointed straight out the back parallel with the gunwale, then the fixed position gimbal will work for you.

As always, everything we make will slide into and securely fasten in the track.

Rod holders, grill, a cleat with a bumper, and tool/beverage holders are just a few of the great combinations for this unit.

30-degree angle gimbal mount drilled and tapped.

The tube is 1-1/2" diameter x 10-1/2" long 

 

You can use the following AGM to install our trolling / downrigger bars to your boat.

 

Part # AGM-150-DB

  •  30 Degree Adjustable Gimbal Mount with 1-1/2 inch diameter tube with a plate for trolling bar
  • The tube is 1-1/2" in diameter and 10 inches long

Part # AGM-175-DB

  • 30 Degree Adjustable Gimbal Mount with 1-3/4 inch diameter tube with a plate for trolling bar
  • The tube is 1-3/4" in diameter and 10 inches long

 

You can use the following AGM with the tracks on them to install items such as a single rod holder, two, three, or four-rod holder trees in vertical or horizontal options, our downrigger swivel base, or anything else we offer.

 

Part # AGM-150-12

  • 30 Degree Adjustable Gimbal Mount with 1-1/2 inch diameter tube with an MT-12 on top
  • The tube is 1-1/2" in diameter and 10 inches long

Part # AGM-175-12

  • 30 Degree Adjustable Gimbal Mount with 1-3/4 inch diameter tube with an MT-12 on top
  • The tube is 1-3/4" in diameter and 10 inches long

Part # AGM-150-18

  • 30 Degree Adjustable Gimbal Mount with 1-1/2 inch diameter tube with an MT-18 on top
  • The tube is 1-1/2" in diameter and 10 inches long

Part # AGM-175-18

  • 30 Degree Adjustable Gimbal Mount with 1-3/4 inch diameter tube with an MT-18 on top
  • The tube is 1-3/4" in diameter and 10 inches long

Part # AGM-150-24

  • 30 Degree Adjustable Gimbal Mount with 1-1/2 inch diameter tube with an MT-24 on top
  • The tube is 1-1/2" in diameter and 10 inches long

Part # AGM-175-24

  • 30 Degree Adjustable Gimbal Mount with 1-3/4 inch diameter tube with an MT-24 on top
  • The tube is 1-3/4" in diameter and 10 inches long

 

Proudly made in the USA!

 

Has our signature textured finish:

  • Adds durability to the aluminum components, hardens your wear surface, no bright reflection, easy to clean.
  • Every aluminum part is anodized after our texturing process to provide the highest quality available.
  • Salt spray tested and proven.

 

Comes in 1 color options:

  • Clear / Silver

Warranty Information

Traxstech offers a limited- lifetime warranty on all products manufactured to be free of defects in workmanship and materials, when used under normal operating conditions and when applied in accordance with specifications. Traxstech will repair or replace at its option, any of its products which have been found to be defective, provided that the product is shipped freight prepaid to Traxstech. The liability under this warranty shall be solely limited to repair or replacement of the company’s product within the warranty period and shall not be liable, under any circumstances, for any consequential, incidental or indirect damages or expenses associated with the warranted product. Any product of Traxstech, which is damaged due to misuse, abuse and /or negligence or has been modified or dismantled, will not be covered by this warranty. When returning an item, you must enclose repair paperwork with contact information and what is wrong with the product, please be detailed. Failure to include this paperwork may delay or void your repair options. You can download the required form needed for warranty work by clicking on the warranty page on this website.

Videos