Adjustable Gimbal Mount

No reviews yet Write a Review
SKU:
AGM-150-12, AGM-150-18, AGM-150-24, AGM-175-12, AGM-175-18, AGM-175-24, AGM-175-DB, AGM-150-DB
$159.99 - $249.99

Description

Traxstech offers a wide variety of gimbal mounts for boats. Designed to work in conjunction with flush-mounted rod holders, our pre-drilled and tapped gimbal mounts allow for easy installation of Traxstech, Cannon, Big Jon Sports, Scotty, Vector, Walker and Penn brand downriggers. Achieve an even wider range of use when you mount our six inch track on top of the gimbal. This allows for the attachment of a single rod holder, vertical or horizontal tree, downrigger swivel base, or anything else we offer. When not in use, the gimbal is easily removed to return the boat to its original condition. We strongly suggest looking under the gunwale and make sure the flush-mount you are using is securely bolted.

Product Features:

  • Hitch pin included in all models.
  • Easily slides and safely secures into our track.
  • 30-degree angle gimbal mount drilled and tapped
  • The tube is 1-1/2" diameter x 10-1/2" long 
  • Makes a great combination with our tool/beverage holders, rod holders, grills, cleats with bumper, etc.
  • Proudly made in the USA!
  • Has our signature textured finish:
    • Adds durability to the aluminum components, hardens your wear surface, no bright reflection, easy to clean.
    • Every aluminum part is anodized after our texturing process to provide the highest quality available.
    • Salt spray tested and proven.
  • Comes in one color option: Clear / Silver

Adjustable Gimbal Mount Guide to Installing our Trolling / Downrigger Bars to Your Boat

Traxstech delivers a 30 Degree Adjustable Gimbal Mount with a variety of sizes and options. Designed to work in conjunction with flush-mounted rod holders. If your flush mounts are not parallel with the gunwale, you can use an adjustable gimbal to line up the track to where you want by moving the track in the direction you want. If the flush mount is pointed straight out the back parallel with the gunwale, then the fixed position gimbal will work for you.

Part #AGM-150-DB

  • 30 Degree Adjustable Gimbal Mount with 1-1/2 inch diameter tube with a plate for trolling bar
  • Tube diameter: 1-1/2"
  • Tube length: 10"

Part #AGM-175-DB

  • 30 Degree Adjustable Gimbal Mount with 1-3/4 inch diameter tube with a plate for trolling bar
  • Tube diameter: 1-3/4"
  • Tube length: 10"

You can use the following AGM with the tracks on them to install items such as a single rod holder, two, three, or four-rod holder trees in vertical or horizontal options, our downrigger swivel base, or anything else we offer.

Part #AGM-150-12

  • 30 Degree Adjustable Gimbal Mount with 1-1/2 inch diameter tube with an MT-12 on top
  • Tube diameter: 1-1/2"
  • Tube length: 10"

Part #AGM-175-12

  • 30 Degree Adjustable Gimbal Mount with 1-3/4 inch diameter tube with an MT-12 on top
  • Tube diameter: 1-3/4"
  • Tube length: 10"

Part #AGM-150-18

  • 30 Degree Adjustable Gimbal Mount with 1-1/2 inch diameter tube with an MT-18 on top
  • Tube diameter: 1-1/2"
  • Tube length: 10"

Part #AGM-175-18

  • 30 Degree Adjustable Gimbal Mount with 1-3/4 inch diameter tube with an MT-18 on top
  • Tube diameter: 1-3/4"
  • Tube length: 10"

Part #AGM-150-24

  • 30 Degree Adjustable Gimbal Mount with 1-1/2 inch diameter tube with an MT-24 on top
  • Tube diameter: 1-1/2"
  • Tube length: 10"

Part #AGM-175-24

  • 30 Degree Adjustable Gimbal Mount with 1-3/4 inch diameter tube with an MT-24 on top
  • Tube diameter: 1-3/4"
  • Tube length: 10"

Videos