Traxstech offers Vertical Bird Trees with 2, 3 or 4 Rod Holders
They slide into our Traxstech mounting track system.
If you use in-line planer boards for lead core, copper line or just long lining this is the ultimate rod holder system for you.
Our exclusive post design allows independent rod holder adjust-ability.
Each holder has six available positions in a 90-degree area for maximum spread of rod tips, allowing easier turns virtually tangle free. The concept of the vertical tree mounted as far forward as possible allows full gunwale for the board rods, divers, and corner downriggers, keeping the transom completely open for netting and resetting baits.We have also used this vertical tree in situations where space is limited and the top holders were used for boards and the bottom one for a diver rod.
Part # VBT-2 / Traxstech Vertical Tree with 2 Rod Holders
The VBT-2 is from the bottom of the post to the top of it about 16” and has 2 VBT-10 rod holders on it. Keep in mind that if you have the top rod holder in an upright position at the top you need to add another 10 inches or so to that height.
Part # VBT-3 / Traxstech Vertical Tree with 3 Rod Holders
The VBT-3 is from the bottom of the post to the top of it about 29” and has 3 VBT-10 rod holders on it. Keep in mind that if you have the top rod holder in an upright position at the top you need to add another 10 inches or so to that height.
Part # VBT-4 / Traxstech Vertical Tree with 4 Rod Holders
The VBT-4 is from the bottom of the post to the top of it about 39” and has 4 VBT-10 rod holders on it. Keep in mind that if you have the top rod holder in an upright position at the top you need to add another 10 inches or so to that height.
**Track not included**
Additional items we sell that will work with the VBT's are the following:
Part # BH-100V - vertical beverage holder
Part # PBCV-3 - vertical planar board caddies for salmon boards
Part # PBCV-4 - vertical planar board caddies for walleye boards
I had an accident with my VBT and bent the post. Do I have to buy a brand new VBT? or can I buy just the post?
We know that accidents do happen, so we sell just the replacement VBT post
Part #VBT-125 is the replacement post for our VBT-2.
Part #VBT-135 is the replacement post for our VBT-3.
Part #VBT-145 is the replacement post for our VBT-4.
If you have damaged any of the VBT-10 rod holders on it, replacement rod holders are available look up part# VBT-10.
Proudly made in the USA!
Has our signature textured finish:
- Adds durability to the aluminum components, hardens your wear surface, no bright reflection, easy to clean.
- Every aluminum part is anodized after our texturing process to provide the highest quality available.
- Salt spray tested and proven.
Comes in 2 color options:
- Clear / Silver
Traxstech offers a limited- lifetime warranty on all products manufactured to be free of defects in workmanship and materials, when used under normal operating conditions and when applied in accordance with specifications. Traxstech will repair or replace at its option, any of its products which have been found to be defective, provided that the product is shipped freight prepaid to Traxstech. The liability under this warranty shall be solely limited to repair or replacement of the company’s product within the warranty period and shall not be liable, under any circumstances, for any consequential, incidental or indirect damages or expenses associated with the warranted product. Any product of Traxstech, which is damaged due to misuse, abuse and /or negligence or has been modified or dismantled, will not be covered by this warranty. When returning an item, you must enclose repair paperwork with contact information and what is wrong with the product, please be detailed. Failure to include this paperwork may delay or void your repair options. You can download the required form needed for warranty work by clicking on the warranty page on this website.
Traxstech Corporation VBT-3 Vertical Bird Tree
Jeff Miller from Traxstech Corporation demonstrates how a vert...
Walleye101 Fishing with Traxstech Vertical Tree Rod Holders
Lance Valentine describes the new Vertical Tree Rod Holders fr...
Traxstech - Vertical Tree Net Holder Option with the VBT-10
For more information, visit www.traxstech.com
Traxstech PBCV-4 Planer Board Caddy for Vertical Tree
Jeff Miller from Traxstech Corporation illustrates how a verti...