DMP / Adapter plate for Driftmaster Style Rod Holders

No reviews yet Write a Review
SKU:
DMP-200, DMP-200LH, BDMP-200, BDMP-200LH
$12.99 - $14.29

Description

Part # DMP-200

DMP-200 / Adapter Plate for Driftmaster® Style Rod Holders.

Adapter plate for Driftmaster style rod holders using the 3/8" - 16 thread hole or 1/2" - 13 thread hole threaded shank to be solidly mounted to this plate.

Allowing you the flex-ability to slide this style holder into the track and position these rod holders in any location you would like, without drilling each one in a specific location.

This is for the Starboard side ( right side facing the front of the boat )

Right Threads - Any Driftmaster rod holder that has a right-threaded stem will be mounted on the right side of the boat. This eliminates rod tip from swinging around toward rear of the boat when under extreme stress while trolling when a big fish strikes or a hang-up occurs.

RIGHT-THREAD ROD HOLDERS REQUIRE RIGHT -THREAD BASES.

 

Part # DMP-200LH

DMP-200LH / Adapter Plate for Driftmaster® Style Rod Holders.

Adapter plate for Driftmaster style rod holders using the 3/8" - 16 thread hole or 1/2" - 13 thread hole threaded shank to be solidly mounted to this plate.

Allowing you the flex-ability to slide this style holder into the track and position these rod holders in any location you would like, without drilling each one in a specific location.

This is for the Port side ( right side facing the front of the boat )

Left Threads - Any Driftmaster rod holder that has a left-threaded stem will be mounted on the right side of the boat. This eliminates rod tip from swinging around toward rear of the boat when under extreme stress while trolling when a big fish strikes or a hang-up occurs.

LEFT-THREAD ROD HOLDERS REQUIRE LEFT-THREAD BASES.

 

*** This is for the plate only, we do not sell the Driftmaster rod holders ***

 

Q: I know that the DMP-200 description says it is for either the 3/8 or ½ in rod holder, I just don't see a second drilled hole for the other size holder ( I run both sizes on my boat). Just wanting to confirm that it has provisions for mounting either rod holder since the image provided doesn't really confirm it.

 

A: Our DMP-200 Adapter plate for Driftmaster Style Rod Holders has both hole sizes in it.

Adapter plate for Driftmaster style rod holders using the 3/8" - 16 thread hole or 1/2" - 13 thread hole threaded shank to be solidly mounted to this plate.

You need to keep in mind and know what your Driftmaster rod holders thread direction is to buy the correct plate.

 

The DMP-200 is for Right Threads - Any Driftmaster rod holder that has a right-threaded stem will be mounted on the right side of the boat. This eliminates rod tip from swinging around toward rear of the boat when under extreme stress while trolling when a big fish strikes or a hang-up occurs.

RIGHT-THREAD ROD HOLDERS REQUIRE RIGHT -THREAD BASES.

 

The DMP-200LH is for Left Threads - Any Driftmaster rod holder that has a left-threaded stem will be mounted on the left side of the boat. This eliminates rod tip from swinging around toward rear of the boat when under extreme stress while trolling when a big fish strikes or a hang-up occurs.

LEFT -THREAD ROD HOLDERS REQUIRE LEFT -THREAD BASES.

 

 

Proudly made in the USA!

 

Has our signature textured finish:

  • Adds durability to the aluminum components, hardens your wear surface, no bright reflection, easy to clean.
  • Every aluminum part is anodized after our texturing process to provide the highest quality available.
  • Salt spray tested and proven.

 

Comes in 2 color options:

  • Clear / Silver
  • Black

Warranty Information

Traxstech offers a limited- lifetime warranty on all products manufactured to be free of defects in workmanship and materials, when used under normal operating conditions and when applied in accordance with specifications. Traxstech will repair or replace at its option, any of its products which have been found to be defective, provided that the product is shipped freight prepaid to Traxstech. The liability under this warranty shall be solely limited to repair or replacement of the company’s product within the warranty period and shall not be liable, under any circumstances, for any consequential, incidental or indirect damages or expenses associated with the warranted product. Any product of Traxstech, which is damaged due to misuse, abuse and /or negligence or has been modified or dismantled, will not be covered by this warranty. When returning an item, you must enclose repair paperwork with contact information and what is wrong with the product, please be detailed. Failure to include this paperwork may delay or void your repair options. You can download the required form needed for warranty work by clicking on the warranty page on this website.